Hula Networks-Call Us! 1.866.485.2638
Hula Networks-Buys and Sells Cisco, Juniper, Extreme,and Sun Microsystems

Hula Networks-Buys and Sells Cisco, Juniper, Extreme,and Sun Microsystems Hula Networks-Buys and Sells Cisco, Juniper, Extreme,and Sun Microsystems
   

 

Hula Networks stocks a large quanity of Smartbits products that is continuously changing. Please call 1.866.HULANET or contact: sales@hulanetworks.com for our up to the minute inventory.

     

Product
Description
Quantity
SmartMetrics modules allow SAN equipment manufacturers, storage system vendors, Storage Service Providers (SSPs), IT managers, and test labs to categorize the true performance, reliability, and quality of 1G and 2G Fibre Channel-based SAN equipment and fabrics. These modules simplify the testing process by emulating hundreds of attached devices such as servers and storage systems, thereby eliminating the need for large, complex test environments.
Call
The GX-1420B SmartCard offers Full Duplex Gigabit and 100 Mbps Ethernet testing capabilities over copper wire. The GX-1420B also supports IP checksum generation and analysis, ARPing, PINGing, and VLAN tagging. The card is compliant with the 802.3ab specification. Call
The GX-1421A is a single-port, 100/1000 Mbps Ethernet, GMII/MII SmartCard that tests the capabilities of on-board PHY chips that interface to either GMII- or MII-based DUTs. The on-board chips handle all IEEE 802.3ab standard requirements for Gigabit Ethernet circuit board designs Call
The LAN-3100A and LAN-3200As are Ethernet modules that can be used to generate, monitor, and capture 10/100/1000 Ethernet traffic. The modules may be used in either SMB-600 or SMB-6000B chassis. Call
The LAN-3101A is a 6-port, full/half duplex, Ethernet/Fast Ethernet SmartMetrics™ module for the SmartBits® SMB- 600 or SMB-6000B chassis. Two of these modules (12 ports) may be used in an SMB-600 chasis. Twelve LAN- 3101A modules may be used in an SMB-6000B chassis, providing a total of 72 SmartMetrics ports Call
The LAN-3102A is a 2-port full/half duplex, Ethernet/Fast Ethernet SmartMetrics module for the SmartBits SMB-600 or SMB-6000B chassis. The LAN-3102A is a low cost,high value module that has the same application compatibility, automation, and feature set of the powerful SmartBits LAN-3101A module. Call
The LAN-3111A is a 6-port, full duplex, Fast Ethernet Fiber SmartMetrics module for the SMB-600 or SMB-6000B chassis. The main function of the LAN-3111A is to test the performance and interoperability of Layer 3 devices, but the module can also be used to test Layer 2 Overview: functionality and performance. The LAN-3111A is capable of full wire-rate traffic generation and analysis. Call
The LAN-3150A is an 8-port, 10/100 Mbps Full/Half Ethernet RMII/SMII module designed to operate with either RMII or SMII physical layer DUTs. The module can interface with both RMII and SMII physical layer DUTs running on the same reference clock (50 MHz for RMII,125 MHz for SMII), and global 12.5 MHz SYNC pulse for SMII synchronization. The module is based upon, and is functionally compatible with, the LAN-3100A module. It is designed to operate in the SMB-600 or SMB-6000B chassis Call
The principal function of the SmartMetrics LAN-3201B is to test the performance and interoperability of Layer 3 devices with a 1 Gigabit Ethernet interface. The module can also be used to test Layer 2 functionality and performance. The LAN-3201B is capable of full wire-rate traffic generation and analysis, can generate the equivalent traffic of one fully-loaded LAN with up to 8,192 end user devices. The LAN-3201B supports up to 8,192 streams, resulting in 512 million flows Call
The SmartBits LAN-3301A and LAN-3311A are TeraMetrics Ethernet modules used to test the performance and interoperability of networking devices. The copper-based LAN-3301A supports rates of 10,100, and 1000 Mbps. The GBIC-based LAN-3311A supports 1000 Mbps (1 Gbps) over single and multi-mode fiber. Each module is capable of simulating the millions of clients and servers required to fully test network systems Call
The SmartBits LAN-3302A is a TeraMetrics Ethernet module used to test the performance and interoperability of networking devices. The copper-based LAN-3302A supports rates of 10 and 100 Mbps. A module is capable of simulating the millions of clients and servers required to fully test network systems. The modules yield per-flow metrics for millions of IP flows used to assess the quality of service provided by BGP, MPLS, OSPF, IP QoS, VoIP, DiffServ, and VLAN enabled devices Call
The SmartBits LAN-3710A series of network performance analysis systems is the world's first 10 Gigabit Ethernet test product line. It provides wire-rate traffic generation, measurement, statistical analysis, and data capture that conforms to the new draft standard for 10 Gigabit Ethernet currently being defined by the IEEE 802.3ae task force. The LAN-3710A products are designed to accelerate the deployment of this new technology into the marketplace. Call
The SmartBits® ML-5710A provides advanced performance analysis capabilities for broadband access devices such as cable and DSL modems with a 10baseT interface. The ML-5710A generates flowbased traffic, while performing SmartMetrics analysis of receive traffic in real time and at wire rate Call
The SmartBits® ML-7710/ML-7711 enable the simulation of large, complex network configurations that are required to develop, test, and validate the performance and interoperability of Layer 2 and Layer 3 devices. The ML-7710 is a full/half duplex, Ethernet/Fast Ethernet SmartMetrics SmartCard for the SMB-200/2000 chassis. The ML-7711 is the corresponding fiber interface, Fast Ethernet SmartMetrics SmartCard. Call
The SmartBits® POS-3500B and POS-3502 OC3c/OC12c SmartMetrics modules simulate the millions of client and server sessions that are required to fully test POS systems. With the POS-3500B and POS-3502, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests. Call
The SmartBits POS-3504AS/AR SmartMetrics OC48c modules are capable of simulating the millions of client/server sessions and control protocols required to fully test POS/SDH systems. With the POS-3504AS/AR, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests Call
The SmartBits® POS-3505As and POS-3505AR TeraMetrics OC48c modules are scalable performance analysis modules capable of simulating the millions of client/server sessions and control protocols required to fully test Packet over SONET/SDH systems. With the POS-3505As and POS-3505AR, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests Call
The SmartBits® POS-3510A and POS-3510As SmartMetrics™ OC3c/OC12c modules are scalable performance analysis modules capable of simulating the millions of client/server sessions and control protocols required to fully test Packet over SONET/SDH systems. With the POS-3510A and POS-3510As, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests. Call
The SmartBits® POS-3511A and POS-3511As TeraMetrics™ OC3c/OC12c modules are scalable analysis modules capable of simulating the millions of client/server sessions and control protocols required to fully test Packet over SONET/SDH systems. With the POS-3511A and POS-3511As, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests Call
The SmartBits POS-3518As and POS-3518AR SmartMetrics modules are scalable analysis modules capable of simulating the millions of client/server sessions and control protocols required to fully test Packet over SONET/SDH systems. With the POS-3518As and POS-3518AR SmartMetrics modules, you can quickly measure all of the key metrics, including true load capacity, latency, and IP frame sequencing using repeatable, industry-standard tests. Call
The SmartBits® POS-3519As and POS-3519AR TeraMetrics are scalable performance analysis modules capable of simulating the millions of client/server sessions and control protocols required to fully test Packet over SONET/SDH systems. Call
The ATM series of SmartBits® compatible SmartCards is used to generate and monitor ATM network traffic. Applications include testing ATM-to-LAN internetworking devices, very high performance ATM backbones, xDSL devices, and LAN-to-ATM, edge devices. Interfaces available in the following bit rates: DS1, E1, 25M, E3, DS3, OC3c, OC12c Call
The highly-portable Spirent Communications SmartBits 200 (SMB-200) is a 4-port performance analysis system that can be easily dispatched to the test site. Call
The industry standard for measuring the performance limits of network devices and complex network configurations including 10/100/1000 Ethernet, ATM, and Frame Relay. Each SMB-2000 can be configured with any combination of up to 20 single-port SmartCards, to support up to 640 ports Call
Spirent Communications’ SmartBits 600 (SMB-600) chassis is the industry’s most portable and compact, high-port-density network performance test system Call
The industry's network performance analysis system of choice. The SMB-6000B has the highest port density the industry, supporting up to 24 Gigabit Ethernet ports, 96 10/100 Ethernet ports 12 POS ports (OC-3c to OC-192c), or a mixture of these port types Call
The TeraMetrics extension modules are PCI Mezzanine Cards (PMCs) that can be added onto Spirent’s TeraMetrics modules to enhance the capabilities of the TeraMetrics platform. Each TeraMetrics module uses a Pentium™-based system running Linux OS with dedicated FPGAs that support the testing of next-generation network and application infrastructures. Call
The WN-3405, -3415, and -3420A SmartCards are network performance analysis tools that performs frame level testing at full wire-rate for Frame Relay and PPP access devices, routers, and switches. Each card provides a single port interface for generating and monitoring data network traffic over WAN links at T1, E1, 6Mbps or 8Mbps. Call
The SmartBits WN-3441A, -3442A, and -3445A SmartMetric SmartCards are network performance analysis tools that perform frame level testing at up to full wire rate for WAN and broadband access devices, LAN routers, and switches at T1, E1 or DS3 Call
SmartMetrics and TeraMetrics 10 Gigabit Ethernet (10GbE) XENPAK-MSA-based test modules used to measure the performance and test the interoperability of networking devices Call

     
 

 

 





 
  © Copyright 2003. Hula Networks. All Rights Reserved. -- 340 E. Middlefield Rd. Mountain View, CA. 94043 -- 1.866.485.2638